57 LITERS 2 INCHES "SK PROFI GLASS 2.0" DISTILLER RECTIFICATION COLUMN

SK PROFI GLASS 2.0 — 2" Reflux Distiller Column with 57 L Boiler and Dome Lid

The SK PROFI GLASS 2.0 is a high-performance 2-inch reflux and distillation column equipped with a powerful vertical Dimroth condenser (double-spiral coil inside), an innovative cone-cup reflux centering system, a liquid selection module and aftercooler.
The set includes a 57 L stainless steel boiler with a dome lid and a polyurethane insulation sleeve for the column as a bonus 🎁.

Designed for efficient separation of liquid mixtures with different boiling points, the system is ideal for rectification, distillation of water and alcohol-based mixtures, and the production of essential oils, hydrolates, and aromatic waters through evaporation and condensation.

Important: AISI-430 stainless steel is not used in any welded parts.

⭐ Base Column Configuration

• 2" tri-clamp with silicone gasket

• 600 mm stainless steel main tube (tsarga) (AISI 304), 51 mm diameter

• Dimroth condenser with double spiral coil in a glass diopter

• Reflux centrator (cone-cup type) in a glass diopter

• Liquid selection unit with stainless steel needle valve

• Product cooler with a viewing window and built-in water flow guide

• Thermometer port + thermometer

• 4× 2" quick-connect fittings

• Sanitary kit: 5 m polyurethane tube + 8 mm quick-connect → ½" adapter

• Panchenkov mesh packing — 5 inserts

• Polyurethane insulation sleeve for the column (gift)

Column Specifications

• Food-grade, non-magnetic stainless steel AISI-304

• Liquid take-off with final product aftercooler

• Dimroth condenser efficiency: up to 4 kW

• Condenser wall thickness: 1.5 mm

⭐ 57 L Distillation Boiler SK with Dome Lid

Professional stainless steel boiler (50 + 7 L) made from AISI-304 with a removable dome lid for increased performance.

Boiler Equipment

• Safety valve

• Thermometer port

• Dome lid with 2" tri-clamp connection

• Stainless steel lid clamp + silicone gasket

• Heating element port (tri-clamp) + gasket + clamp

• ¾" stainless steel drain valve

Heating element with power controller purchased separately.

⭐ Kit Characteristics

• 2 " stainless steel tube, 600 mm length  

• Comes with polyurethane heat-insulating cover

• Tube length: 4.5 m

• Tube diameter: 6 mm

• Utilization power: up to 4 kW

• Wall thickness: 1.5 mm

• Assembled height: 22 cm

The centralizer (cone-cup type) directs reflux precisely to the center of the Panchenkova mesh, eliminating wall-flow effects and significantly improving rectification efficiency.

• Innovative 9-jet multi-point irrigation minimises wall effect

• Minimisation of wall effect

• Enhances heat-mass transfer efficiency

• Reduces required column height

• Provides clear visual process control

• Length (tap → drain): 42 cm

Aftercooler with Viewing Window

• Stainless steel control tap

• Push-in connectors for 8 mm tubing

• Mini-diopter for visual control

• Internal spiral for even water distribution

• Length from tap to spout: 42 cm — optimal for cooling product at dephlegmator power up to 4 kW

⭐ SK Boiler Specifications

• Material: AISI-304 stainless steel (non-magnetic)

• Bottom type: 3-layer sandwich (stainless/ aluminum / magnetic stainless)

• Bottom thickness: 5 mm

• Wall thickness: 1 mm

• Lid thickness: 1.2 mm

• Diameter: 428 mm

• Works on all stoves, including induction

• Internal volume markings

• TEN (heating element) port included

⭐ Optional Accessories for Expanded Functionality

Eliminates sulfur odors, enhances purity, and increases tank volume.

Doubles copper contact area—ideal alternative to full copper tanks.

Increases tank volume; fully sealed using clamp + silicone gasket.

Converts the tank into a complete home cheese-making pasteurizer.

Designed for distilling thick mash, fruit mash, grain wash, and brewing beer.

Turns the tank into a mini-brewery.

Increases tank volume and eliminates sulfur-based off-flavors.

A durable alternative to a false bottom; prevents scorching during mashing or distillation.